Unique stainless steel hydraulic fittings from
FC 1:14 Models ApS
Unique banjo bolt with a recess so that the hydraulic oil can flow freely in the banjo, as well as a special nipple that can easily be increased from o2 to o3 mm. hydraulic hose.
See our selection of unique hydraulic fittings in stainless steel.
After many years of experience in hydraulic systems, the primary focus is on the technical details.
The banjo bolt is made with a recess at the cross hole, which always ensures that the oil can flow freely regardless of the position of the cross hole in relation to the outlet nipple on the banjo.
We use 0.8 mm. Nylon PA6 gaskets, as this makes assembly easier and ensures a good sealing ability that can also take into account slight unevenness in the assembly.
We have milled our security sleeve for o3 hose flat on one side so that it can be mounted with the flat side down against the valve block, cylinder etc. and thus provide a reasonable clearance so that the banjo can be clamped completely flat to the workpiece.
O2/M3 ANGLE BANJO NIPPLE COMPLETE
Nr.: IA-10-018-0001-A
Delivered unassembled.
Price for bag with 5 sets
40 euro excluding VAT + shipment
O3/M3 ANGLE BANJO NIPPLE COMPLETE
Nr.: IA-10-018-0009-A
Delivered unassembled.
Price for bag with 5 sets
37 euro excluding VAT + shipment
O2/O3 STRAIGHT TRANSITION WITH COVER
Nr.: IA-10-018-0007-A
Delivered unassembled.
Price for bag with 5 sets
36 euro excluding VAT + shipment
